| نام مرکز
|
:
|
کتابخانه مرکزی دانشگاه کردستان
|
| نوع مدرک
|
:
|
پایان نامه فارسی
|
| زبان مدرک
|
:
|
فارسی
|
| شماره رکورد
|
:
|
226249
|
| شماره مدرک
|
:
|
۴۴۱۰پ
|
| شماره راهنما
|
:
|
Reg. No. ۴۲۶۸
|
| سرشناسه
|
:
|
مرزبانی، طیبه ، پديدآور
|
| عنوان
|
:
|
کاربرد نانو ذرات منیزیم اکساید جهت حذف رنگ مالاشیت گرین و سانست یلو در محلولهای آبی [پایان نامه]
|
| نویسنده
|
:
|
/ طیبه مرزبانی
|
| استاد راهنما
|
:
|
غلامرضا خیاطیان
|
| محل تحصیل
|
:
|
: دانشگاه کردستان/ دانشكده علوم پایه
|
| سال تحصیل
|
:
|
، ۱۳۹۸
|
| صفحه شمار
|
:
|
ه، ۷۱ ص:مصور، جدول
|
| مقطع تحصیلی
|
:
|
کارشناسی ارشد
|
| رشته تحصیلی
|
:
|
شیمی
|
| دانشگاه
|
:
|
کردستان
|
| گروه تحصیلی
|
:
|
شیمی
|
| گرایش تحصیلی
|
:
|
تجزیه
|
| دانشکده
|
:
|
دانشگاه کردستان، دانشکده علوم پایه
|
| يادداشت
|
:
|
چکیده فارسی - انگلیسی
|
| چکيده
|
:
|
در این تحقیق توانایی جاذب نانوذره منیزیم اکساید جهت حذف رنگ مالاشیت گرین از محلولهای مایع مورد بررسی قرار داده شد. برای تعیین عوامل مؤثر در جذب از سیستم ناپیوسته استفاده کردند. همچنین اثر پارامترهای مختلفی همچون زمان، pH، مقدار جاذب و غلظت اولیه رنگ بر میزان جذب مورد بررسی قرار گرفت. مدت زمان لازم برای حذف رنگ مالاشیت گرین توسط نانوذره منیزیم اکساید، 30 دقیقه بدست آمد. بالاترین مقدار جذب در pH بین 7 تا 10 انجام گرفت. در روش جذب سطحی از ایزوترمهای لانگمویر، فروندلیچ و تمپکین برای تعیین مقدار جذب استفاده شد. این روش با مدل فرندلیچ توصیف شد و بیشترین ظرفیت جذب رنگ بر روی جاذب (53/35 میلیگرم بر گرم) شد. مدل سینتیکی درجه دوم روند جذب مالاشیت گرین بر روی نانوذره منیزیم اکساید را به خوبی نشان میدهد. بالا رفتن جذب با افزایش دما نشان میدهد که مالاشیت گرین بر روی نانوذره منیزیم اکساید به طور طبیعی گرماگیر است. پارامترهای ترمودینامیکی از جمله آنتروپی، انرژی آزاد و آنتالپی نشان میدهد که فرایند جذب رنگ مالاشیت گرین بر روی نانوذره منیزیم اکساید در دماهای بالا بهتر است. درصد حذف مالاشیت گرین بر روی نانو ذره منیزیم اکساید 100% به دست آمد.در بخش دوم حذف رنگ سانست یلو توسط نانوذره منیزیم اکساید مورد بررسی قرار گرفت. مدت زمان لازم برای جذب، 80 دقیقه به دست آمد. بیشترین مقدار جذب در 1pH= انجام گرفت. در روش جذب سطحی از ایزوترمهای لانگمویر، فروندلیچ و تمپکین برای تعیین مقدار جذب استفاده شد. جذب سطحی با روش فروندلیچ و لانگمویر توصیف گردید و بالاترین میزان ظرفیت جذب بر روی نانوذره منیزیم اکساید (164/24 میلیگرم بر گرم) به دست آمد. مدل سینتیکی درجه دوم روند جذب سانست یلو را بر روی نانوذره منیزیم اکساید به خوبی نشان داد. افزایش میزان جذب با کاهش دما نشان میدهد که سانست یلو بر روی نانوذره منیزیم اکساید گرمازا میباشد. پارامترهای ترمودینامیکی از جمله آنتالپی، انرژی آزاد و تغییرات آنتروپی نشان میدهد که جذب رنگ سانست یلو بر روی نانوذره منیزیم اکساید در دماهای پایین بهتر میباشد. درصد حذف سانست یلو بر روی نانوذره منیزیم اکساید %74 به دست آمد.
|
|
|
:
|
In this study, the ability of magnesium oxide nanoparticles adsorbent to remove malachite green dye from liquid solutions was investigated. The batch system was used to determine the effective factors on adsorption. Also, the effect of various parameters such as time, pH, adsorbent amount and initial dye concentration on the adsorption was investigated. The time required for the removal of malachite green by magnesium oxide nanoparticles was 30 minutes. The highest amount of adsorption occurred at pH 7 to 10 '. Adsorption of Langmuir, Freundlich and Tempkin isotherms was used to determine the adsorption amount. This method was described by the Freundlich model and had the highest dye adsorption capacity on the adsorbent (35.53 mg / g). The second order kinetic model illustrates the adsorption process of malachite green on magnesium oxide nanoparticles. Increasing absorption with increasing temperature indicates that malachite green on magnesium oxide nanoparticles is naturally endothermic. Thermodynamic parameters such as entropy, free energy and enthalpy indicate that the process of dye adsorption of malachite green on magnesium oxide nanoparticles is better at high temperatures. The percent removal of malachite green was 100% magnesium oxide nanoparticle.In the second part, the removal of sunset yellow dye by magnesium oxide nanoparticles was investigated. The time taken to absorb was 80 minutes. The highest amount of adsorption occurred at pH = 1. Adsorption of Langmuir, Freundlich and Tempkin isotherms was used to determine the adsorption amount. The adsorption was described by Freundlich and Langmuir method and the highest adsorption capacity was obtained on magnesium oxide nanoparticles (24.164 mg / g). The second order kinetic model showed a good adsorption process of Sunset yellow on magnesium oxide nanoparticles. Increasing the rate of adsorption with decreasing temperature indicates that Sunset yellow is exothermic on magnesium oxide nanoparticles. Thermodynamic parameters such as enthalpy, free energy, and entropy variations show that the absorption of sunset yellow dye onto magnesium oxide nanoparticles is better at low temperatures. The removal rate of Sunset Yellow 74% was obtained on magnesium oxide nanoparticles.
|
| توصیفگر
|
:
|
نانوذره منیزیم اکسایدMagnesium Oxide Nanoparticle
|
|
|
:
|
رنگ مالاشیت گرینMalachite Green
|
|
|
:
|
رنگ سانست یلوSunset Yellow
|
| شناسه افزوده
|
:
|
خیاطیان، غلامرضا، ۱۳۳۶ - ، استاد راهنما
|
| شناسه افزوده
|
:
|
دانشگاه کردستان . دانشکده علوم پایه
|